DocumentsCCF42v1.0 - Stage 3 Interoperability Tests Test Report
CDMA Certification Forum™ (CCF) Reference Document Stage 3 Interoperability Tests Test Report
This document is written to provide a suggested framework for recording and tracking Stage 3
Interoperability Tests, test results. Soft/electronic copies of this document are available from
the CDMA Development Group.
The intent of this document is to assist persons performing the tests in capturing sufficient
information to assure system compliance and test repeatability. | $100.00
|
CCF28v5.0 - Stage 3 Interoperability Tests
CDMA Certification Forum™ (CCF) Reference Document Stage 3 Interoperability Tests.
This document is for reference only and is not required for CCF Certification. This document facilitates Code Division Multiple Access Development Group (CDG) Stage 2 interoperability testing between CDMA infrastructure and mobile station vendors. It is applicable to MIN_P_REV of 2 or less. | $100.00
|
CCF41v1.0 - Stage 2 Interoperability Tests
CDMA Certification Forum™ (CCF) Reference Document Stage 2 Interoperability Tests Test Report.
This document is for reference only and is not required for CCF Certification. This document is written to provide a suggested framework for recording and tracking Stage 2 Interoperability Tests, test results.
| $100.00
|
CCF45v1.0 - Mobile Station Diagnostic Monitor Minimum Requirements
CDMA Certification Forum™ (CCF) Reference Document Mobile Station Diagnostic Monitor Minimum Requirements.
This document is for reference only and is not required for CCF Certification. This document describes mobile station diagnostic monitor interface minimum requirements and suggested, or recommended, diagnostic monitor features.
| $100.00
|
CCF19v1.0 - Stage 1 Interoperability Tests
CDMA Certification Forum™ (CCF) Reference Document Stage 1 Interoperability Tests
This document is for reference only and is not required for CCF Certification. This reference document details definitions, methods of measurement, and minimum performance characteristics of 800 MHz CDMA cellular mobile stations. This reference was created for the purpose of assuring that a mobile station can operate sufficiently to begin interoperability testing with infrastructure equipment.
| $100.00
|
CCF22v8.0 - Stage 2 Interoperability Tests (TIA/EIA/IS-95-A)
CDMA Certification Forum™ (CCF) Reference Document Stage 2 Interoperability Tests (TIA/EIA/IS-95-A) This document is for reference only and is not required for CCF Certification. This document facilitates Code Division Multiple Access Development Group (CDG) Stage 2 interoperability testing between CDMA infrastructure and mobile station vendors. It is applicable to MIN_P_REV of 2 or less. | $100.00
|
CCF46v1.0 - Frame Error Rate/Erasure Rate
CDMA Certification Forum(CCF) Reference Document-Frame Error Rate/Erasure Rate.
The purpose of this information is to aid CDG members in defining and distinguishing between erasure rate and frame error rate.
| $100.00
|
CCF35v3.0 - System Performance Tests (Optional)
CDMA Certification Forum™ (CCF) Reference Document System Performance Tests (Optional)
This document is for reference only and is not required for CCF Certification. The purpose of this document is to provide the CDMA community with a collection of standardized tests to objectively evaluate the performance of CDMA from an end user perspective. These tests generally do not have pass/fail criteria. In some cases however, a minimum standard is recommended. These tests bench mark performance of the system, and help identify sources of impairments, if any.
| $100.00
|
CCF51v1.0 - Enhanced Variable Rate Codec (EVRC) Performance Testing
CDMA Certification Forum™ (CCF) Reference Document Enhanced Variable Rate Codec (EVRC) Performance Testing.
This document is for reference only and is not required for CCF Certification. The purpose of this document is to establish a process for evaluating audio performance of EVRC vocoders in CDMA systems.
| $100.00
|
CCF57v5.0 - Stage 2 Interoperability Testing for cdma2000 Mobiles
CDMA Certification Forum™ (CCF) Reference Document Stage 2 Interoperability Testing for cdma2000 Mobiles P_REV less than or equal to 7 and/or HRPD up to and including Rev A.
This document is for reference only and is not required for CCF Certification. This document defines CDG Stage 2 Interoperability Testing for cdma2000 Mobiles. CDG Stage 2 Testing is part of the recommended CDG Stage 1-2-3 design verification testing for new mobiles that is performed at base station infrastructure interoperability 5 labs. This document references interoperability tests from 3GPP2 test specifications and provides some guidelines for minimum entrance criteria, execution strategy, and 7 test report. The terms HRPD and EVDO are equivalent terms and refer to access terminals and access networks that support revisions of C.S0024.
| $100.00
|
CCF64v1.0 - Stage 3 Testing for CDMA2000
CDMA Certification Forum™ (CCF) Reference Document Stage 3 Testing for CDMA2000.
This document is for reference only and is not required for CCF Certification. This document defines CDG Stage 3 Testing for CDMA2000®, as recommended by the CDMA Development Group (CDG).
| $100.00
|
CCF82v1.0 - Data Performance Measurement Guidelines for CDMA2000 High Speed Packet Data Service
CDMA Certification Forum™ (CCF) Reference Document Data Performance Measurement Guidelines for CDMA2000 High Speed Packet Data Service.
This document is for reference only and is not required for CCF Certification. This document presents tests that can be used for measuring packet data performance of a cdma2000® system. This document does not specify minimum performance requirements. The tests can be used for various purposes, e.g. benchmarking packet data system performance, regression testing, identifying effects of new network configurations and new features, etc.
| $100.00
|
CCF83v3.0 - Stage 1 Testing for CDMA2000 Mobiles MOB_P_REV = 6, 7
CDMA Certification Forum™ (CCF) Reference Document Stage 1 Testing for CDMA2000® Mobiles MOB_P_REV = 6, 7.
This document is for reference only and is not required for CCF Certification. This document lists the standard test specifications that comprise CDG Stage 1 Testing. It also describes CDG Stage 1-2-3 Testing for new mobile design verification testing.
| $100.00
|
CCF85v1.0 - Sync Channel Workaround Test for Release A
CDMA Certification Forum™ (CCF) Reference Document Sync Channel Workaround Test for Release A.
This document is for reference only and is not required for CCF Certification. Two workarounds are described, due to non-compliant IS-95 mobile stations, in the Sync Channel Workarounds for CDMA2000 Release A (CDG 78, Ref. 1): Chapter 2: Network-Based Solution Chapter 3: Single & Multi-carrier Solution Using Special Mobile Procedures This document contains test procedures to verify the mobile’s compliance with these workarounds.
| $100.00
|
CCF89v2.1 - Talk-Time and Standby-Time Measurement
CDMA Certification Forum™ (CCF) Reference Document Talk-Time and Standby-Time Measurement.
This document is for reference only and is not required for CCF Certification. This specification describes the CDG standard method of measuring Talk-Time and Standby-Time for CDMA mobiles. Two equivalent measurement methods are described. Some informative discussion on practical battery life scenarios is included in the appendices.
| $100.00
|
CCF45v1.0 - Mobile Station Diagnostic Monitor SDMPI
CDMA Certification Forum™ (CCF) Reference document
Mobile Station Diagnostic Monitor Standard DM Programming Interface (SDMPI) - This document is for reference only and is not required for CCF Certification. The standard diagnostic monitor programming interface is utilized when performing CDG Stage 2 interoperability testing. | $100.00
|
CCF-Field Interoperability (FIO) Test Plan
The purpose of CCF-FIO is to perform infrastructure–dependent1 test cases extracted from
3GPP2 C.S0058. These tests are performed Over-The-Air against the Base Stations from
various manufacturers. The purpose of these tests is to verify MS-BS compatibility where
the Base Station is known to be standards-compliant, but where the Base Station vendor
implementation of the Standard will govern operation of certain features.
CCF-FIO test plan is extracted from 3GPP2 C.S0058 with test setups, test procedures and
test parameters adapted to Over-The-Air testing. In this case the specific test procedures
are included directly in this document.
The objective of this document is to provide tests to demonstrate the interoperability of
terminal devices/access terminals and base stations/access networks compliant with the
cdma2000 family of standards. References to the applicable standard functionality are listed
in the traceability section of each test case.
| $100.00
|
CCF-Laboratory Test Plan for cdma2000 Mobile Stations
This CCF-L Laboratory Test Plan version 7.1.0 details the specific test cases required to certify the minimum performance and signaling conformance characteristics for global cdma2000 terminal devices. | $100.00
|
|
